|
|
|
|
click to enlarge
|
Rating:
Not yet rated
Add Review for this product
White Industries ENO Crankarms
Code: WINDCR
Price: $179.95
ENO Cranks - Bold. CNC machined box style aluminum arms, rigid and stiff, zero run out square taper, designed for a splined chain ring, low Q factor, 47.5mm offset, Made in the USA.
Material - 2024 aluminum
Length - 170mm, 175mm, or 180mm
Chainring - The ENO crank is designed with a proprietary spline that mates to White Industries chainrings. The ring is dropped onto the spline and a lock ring holds the ring in place. The aluminum chainrings are available in 32t, 34t, 36t, 38t, and 44t.
Lockring - The lock ring is made out of aluminum and can be tighten down or loosened by using a bottom bracket cup removal tool which can be referred to as double ended lock ring spanner.
Chainline offset - 47.5mm from the center of the BB shell to the chainring.
Bottom bracket - The ENO crank is designed with an extremely low Q factor. With a 68mm BB shell we recommend a 113mm square tapered bottom bracket, however, some frames have wider chainstays and need a longer BB. By simply taking a few measurements on your frame you can determine a suitable BB spindle length for your frame. First measure from the center of the BB shell back along the chainstay 180mm. At that point measure across the stays. Your measurement should be from the outside of the stay to the opposing outside stay. If the measurement is 135mm or less, use a 113mm BB. If your measurement is higher than 135mm, then add the difference to the base 113mm to determine you BB length. For instance, if the chainstay measurement is 140mm then the BB length would be 118mm.
Weight - 525 grams
Special Order Item: This is a Special Order item that does not fall under our normal "Ship Within Three Days" policy. eMail info@bikeman.com for availability and shipping information.
|
 |
|
|
){kind=link}
