|
|
$29.95
|
|
Buy / Details
|
|
White Industries Freewheel Tool: Remove a freewheel from the White Industries Eccentric Eno hub without removing the end caps....
|
|
|
|
|
$25.95
|
|
Buy / Details
|
|
Shimano TL-FW40 1-Speed Freewheel Remover: 2-Prong...
|
|
|
|
|
$19.95
|
|
Buy / Details
|
|
ACS Freewheel Remover: 14/15T & >16T Fits all axles...
|
|
|
|
|
$14.95
|
|
Buy / Details
|
|
Shimano TL-FW30 Splined Freewheel Remover:...
|
|
|
|
|
$14.95
|
|
Buy / Details
|
|
Park FR-6 4 Prong BMX Remover: Fits most popular four notch BMX freewheels, including 14mm oversize axles. Heat treated alloy tool steel with one-inch base to fit end of SR-1, FRW-1, adjustable wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts....
|
|
|
|
|
$14.95
|
|
Buy / Details
|
|
Park FR-8C Freewheel Remover for BMX: The new FR-8 is designed to remove four-notch freewheels from 'flip-flop' BMX hubs with 30 x 1mm threads, such as the AC® FAT compact freewheel. Fits over the 14mm oversize axles. Investment cast and heat-treated for strength and durability. Packaged carded. One-inch base to fit end of SR-1, FRW-1,...
|
|
|
|
|
$12.95
|
|
Buy / Details
|
|
ACS 14T/15T Metric Freewheel Remover: Fits all axles...
|
|
|
|
|
$12.95
|
|
Buy / Details
|
|
ACS Freewheel Remover 16-22T: Fits all axles...
|
|
|
|
|
$11.95
|
|
Buy / Details
|
|
Lifu 4-prong BMX Freewheel Remover: #09E1...
|
|
|
|
|
$10.95
|
|
Buy / Details
|
|
Pedro's 4-prong BMX Freewheel Socket: 4 prong design fits most common BMX freewheels. Large center hole accepts 14mm axles. Professional quality CrMo socket....
|
|
|
|
|
$10.95
|
|
Buy / Details
|
|
Lifu Dicta Metric BMX Freewheel Remover:...
|
|
|
|
|
$9.95
|
|
Buy / Details
|
|
Park SPA-2 Red Pin Spanner: The SPA-2, with red handle, will fit one-key release retaining rings on Shimano® and Campagnolo® cranksets and the adjusting cone on most freewheel clusters (not freehubs). Park Tool Pin Spanners have been designed to give maximum usefulness and versatility at the lowest possible cost. Adjusts to a wide range of...
|
|
|
|
|
$9.95
|
|
Buy / Details
|
|
Park FR-3 Suntour 4 Prong Freewheel Remover: Fits all Sun Tour® four notch freewheels since 1986. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Always use a skewer or axle nut to hold remover firmly in place....
|
|
|
|
|
$8.95
|
|
Buy / Details
|
|
Park FR-1 Shimano UG Freewheel Remover: Fits all Shimano® freewheels since 1985, Uniglide® before 1985; S.I.S. and Sachs® Aris freewheels. Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Use the FR-5 for the cassette type lockrings. NOTE: Not...
|
|
|
|
|
$8.95
|
|
Buy / Details
|
|
Park FR-7C Falcon Freewheel Remover: The FR-7 Freewheel Remover is specifically designed for Falcon® brand freewheels. The shape of the FR-7 looks similar to the FR-1 (for Shimano® , Sun Race® , Sachs® and similar freewheels). The FR-7, however, is made slightly larger to fit the slightly larger splined pattern of the Falcon® Freewheel. To...
|
|
|
